Line Engraver “Light” available in these sizes:

35015 (0.15mm) | 35020 (0.2mm) | 35030 (0.3mm) | 30505 (0.5mm)

​

Body Width: 6mm | Body Thickness: 0.5mm

​

This is a light-weight version of MADWORKS D.L.C. series. Suitable for any scale model kits and military model kits. Comparing to D.L.C. Line Engraver, LIGHT series has a shorter body and without the dlc-coating. This reduces the cost, making it cheaper and more suitable for beginners.

 

Note:

Recommend using with Tamiya 74040 or OLFA AK-4 blade handle, as well as MADWORKS’ MH-01. Suitable for most plastic model kit (ABS/PVC), resin kits, and epoxy kits.

​

宽度：约6mm，厚度：约0.5mm

​

适用于各比例科幻模型及军事模型运用，此款刀具與DLC相比,刀具設計較短並使用一般塗層,有效節省成本,相當適合新手練習使用

​

备注：

建议使用田宫 74040 或 OLFA AK-4 的刀柄作为握把，并使用惯用手拿取，针对一般塑胶模型（ABS/PVC）、树脂模型、环氧树脂模型，皆可正常使用!

​