NERON系列 NERON SERIES

蝕刻片系列 PHOTO-ETCHED SERIES

N-001

弧形尺/曲线规 S
ARC GAUGE S

N-003

平手丸取工具
SPIN BLADES

N-005

中心點測量尺規

MIDPOINT LOCATOR

N-007

云形板定规
FRENCH CURVES

N-009

云形板定规
FRENCH CURVES

N-012

精密型打磨治具
SANDING BOARD TOOLS

N-015

細節升級: 眼鏡

DETAIL-UP PARTS: GLASS FRAMES

N-017

細節升級: 散熱器 B
DETAIL-UP PARTS: HEAT SINKS B

N-019

蝕刻片場景系列: 輪胎架
DIORAMA SERIES: TIRE RACKS

N-002

弧形尺/曲线规 L
ARC GAUGE L

N-004

細節升級
PIVOT HOLES DETAILS

N-006

平手丸取工具
SPIN BLADES

N-008

云形板定规
FRENCH CURVES

N-011

平手丸取工具
SPIN BLADES & PIVOT HOLES

N-014

細節升級: 眼鏡

DETAIL-UP PARTS: GLASS FRAMES

N-016

細節升級: 散熱器 A
DETAIL-UP PARTS: HEAT SINKS A

N-018

細節升級: 散熱器 C
DETAIL-UP PARTS: HEAT SINKS C

N-020

蝕刻片場景系列: 儲物架
DIORAMA SERIES: STORAGE RACK

N-001 | N-002 弧形尺/曲线规
ARC GAUGE S/L

Suitable for adding curve panel line.

With reference to the curvature, select an appropriate stencil from the templates
Use the stencil to mark and cut out the curve on a Carving Guide Tape (Consider putting the carving tape onto a masking tape first. This protects the adhesive and keep the carving tape sticky)
Use the now-cutted carving tape to create the panel line on the part
The tiny holes on the stencil can be used for adding rivets

適用於弧形刻線的有效型版

观察零件所需要用的弧度，挑选合适的弧形尺
利用刻线胶带进行裁切（底部可用遮盖胶带以免刻线胶带粘度降低）
使用裁切好的刻线胶带新增或补刻线
弧形尺上的洞洞也可以拿来做新增柳钉

n001002

MADWORKS 平手丸取工具
SPIN BLADES & PIVOT HOLES

N-003 | N-006 SPIN BLADES

These tools are a collection of photo-etched blades (1.4mm 1.5mm 1.6mm 1.7mm 1.8mm 2.0mm 2.2mm 2.4mm 2.6mm 2.8mm 3.0mm) designed to create pivot holes on model kits:

Use a regular 0.5mm drill bit and drill the central point where the pivot hole will be;
Pin the tip of the blade to this central pin, then spin the blade to cut through the surface;
Result;
Add details using Neron N-004, or other MADWORKS large selections of detail-up parts.

N-003 and N-006 differs in the shape of the edge of pivot holes.

Suggestion: Attached the spin blade to a drill-bit handle. This way is easier to operate